Qldroofngutterbanner1200x299

Roof Repointing Logan

Ridge-Cap Re-Bedding & Flexible Re-Pointing for Logan Tile Roofs

Logan’s tile roofs cop a hammering — summer storms rolling through Springwood and Slacks Creek, baking afternoon sun over Daisy Hill and Shailer Park, then the next downpour finding every gap in tired mortar. When ridge capping starts to crack, lift or leak, re-pointing is what brings it back to a watertight, weatherproof finish. At QLD Roof N Gutter, we re-bed and re-point ridge capping right across Logan to stop leaks before they reach your ceilings and to add years to the life of your tile roof.

From a few crumbling ridge caps in Loganholme to a full re-bed and re-point in Beenleigh, we handle the lot — with honest advice, tidy workmanship, and clear updates from first inspection to final clean-up.

✅ Expert ridge cap re-pointing across Logan
✅ Mortar removal and re-bedding where the bed has failed
✅ Flexible pointing compounds that flex with the roof
✅ Fully licensed and insured Logan roofers

Get a Quick Quote
Call us on 0480 041 400 or click below for fast, obligation-free pricing.

Repointing (9)
Topratedcompany

150+ 5-Star Reviews

Quickresponse

FAST
Response

Workguaranteed

Work
Guaranteed
7-Year Workmanship Warranty

Licensedinsured

Licensed
& Insured
QBCC 15301933

Verfiedlocalbusiness

Verified Local
Business

Repointing (2)

What Is Roof Re-Pointing?

The ridge caps along the peaks and hips of your roof are held down by a bed of mortar. Over the years, Logan’s sun, storms and driving rain crack and wash that mortar out. Re-pointing is the process of cutting out the old, failed pointing and applying a flexible compound that reseals and locks those ridge caps back in place.

Where the ridge caps themselves have come loose because the underlying bed has perished, we re-bed them first — lifting each cap and resetting it into fresh mortar before re-pointing over the top.

We’ll inspect your Logan roof and recommend exactly what it needs — a straight re-point, or a full re-bed and re-point — nothing more, nothing less.

Common Re-Pointing Jobs We Handle Across Logan

  • Cracked or crumbling ridge-cap pointing
  • Loose or lifting ridge caps that need re-bedding
  • Gaps in mortar letting in water or debris
  • Re-pointing after solar panel removal
  • Storm-damaged ridge capping repairs
  • Full tile roof re-bedding and re-pointing

If you’ve spotted tiles shifting in Meadowbrook, sandy mortar grit washing into the gutters in Waterford West, or water stains appearing on a ceiling in Loganlea — it’s time to have the pointing checked.

⭐⭐⭐⭐⭐ “Highly Recommend Qld Roof N Gutter! Very reliable team. Did an amazing job on our complete roof repoint!” – Cara

⭐⭐⭐⭐⭐ “The team did a great job installing downpipes and fixing our leaking roof. The work that Daniel did was excellent and I would strongly recommend Johnathon, Daniel and their Team.” – Katie

⭐⭐⭐⭐⭐ “Very happy with the responsiveness and quality of work from John and his team. Thanks for taking my call and finding a solution for us.” – Amy

Logan-Wide Tile Roof Re-Pointing

We re-bed and re-point tile roofs right across the City of Logan — from Browns Plains, Marsden and Crestmead in the west to Cornubia, Bethania and Beenleigh in the east, and everywhere in between.


A Recent Logan Re-Pointing Job

We were recently called out to a terracotta tile roof in Slacks Creek where the homeowner had noticed a damp patch on the hallway ceiling after a storm. The ridge-cap pointing had cracked and lifted along two hips, and a tiled valley had silted up and started backing water under the tiles.

We cut out the failed mortar, re-bedded the loose caps, applied flexible pointing colour-matched to the terracotta, then cleared and re-sealed the valley to get the water running where it should. One tidy visit, photos before and after, and a roof that’s watertight again.

Our Re-Pointing Process

Inspection – We check the condition of your ridge capping, bedding and mortar.

Removal – Damaged pointing is cut out cleanly.

Re-bedding (if needed) – Loose ridge caps are reset into fresh mortar.

Re-pointing – Flexible compound is applied and shaped for a watertight finish.

Clean-up – Roof left neat and tidy, with photos before and after.

Repointing (3)

FAQs – Roof Re-Pointing in Logan

How do I know if my Logan roof needs re-pointing?
Signs include visible cracks in the ridge-cap mortar, caps shifting or lifting, mortar grit in the gutters, or leaks during heavy rain. If you’re unsure, we’ll inspect it and let you know.

Do you re-bed ridge caps as well?
Yes — if the bed under the ridge caps has failed, we’ll re-bed them in fresh mortar before re-pointing.

How long does re-pointing last?
Flexible pointing compounds can last 10–15 years or more when properly applied. We always use quality materials to ensure a long-lasting result.

Do you work with terracotta as well as concrete tiles?
Yes — we re-point both, and colour-match the pointing so it blends with terracotta and concrete ridge capping alike.

Will you check the rest of the roof while you’re there?
Yes — we’ll look over valleys, flashings and tiles for any other issues and give you an honest report.


Why Choose QLD Roof N Gutter for Re-Pointing in Logan?

✅ We turn up on time and do what we say
✅ No unnecessary work recommended
✅ All work is guaranteed and to code
✅ We specialise in tile roofing and ridge repairs
✅ 100+ Five-Star Reviews across Logan, Brisbane & the Gold Coast

Qldroofngutterstaff

Get a Quote for Roof Re-Pointing in Logan

★★★★★ 100+ 5-star reviews!